25.1 Manually specifying DMX Channel Values

To set a dmx channel or group of channels to a specific value:

  1. Open the DMX Output window (press the SETUP key on the front panel and select the DMX button on the main toolbar)

  2. Use the two drop down menus at the top of the DMX Output window to select the corresponding DP8000 and universe you wish the manilpulate

  3. Double click on the desired dmx channel cell in the spreadsheet (or highlight a group of dmx channel cells and press set)

  4. Enter a valid dmx value (0 thru 255)

  5. Press enter to confirm (the value will now be displayed in blue)