Section 23: Linear Timecode (LTC)

Table of Contents

23.1: LTC Input into Console
23.2: LTC Input into a DMX Processor 8000
23.3: Viewing Incoming LTC
23.4: Triggering Cues from LTC
23.5: Editing Timecode Values for a Cue
23.6: Simulating LTC

Linear Timecode (LTC) is a form of SMPTE timecode encoded into an audio signal. The Hog 4OS can listen to LTC by inputting the LTC signal directly into the back of the console or by inputting the LTC audio signal into a DP8000 through an attached USB LTC widget.