12.1 Recording Scenes

You can record scenes either directly to a physical master for immediate playback, or to the Scene Directory.

12.1.1 Recording to the Scene Directory

To record a scene:

  1. Create the look for the scene in the Programmer or editor.

  2. Record, Scene : the Scene Directory window opens.

  3. Select the destination location in the Scene Directory window.

  4. Alternatively, enter a number on the keypad and press Enter.

12.1.2 Recording to a Physical Master

You can record a scene directly to a physical master. Hog 4OS will automatically put it in the next available location in the Scene Directory:

  1. Create the look for the scene in the Programmer or editor.

  2. Record, Scene

  3. Press the Choose key above the desired physical master.

12.1.3 Naming a Scene

You can give a scene a name that will be displayed in the Scene Directory window:

  1. Open + Scene : open the Scene Directory.

  2. Check that the Guard button is selected, so that you don't accidentally activate a scene when pressing its button in the directory.

  3. Select the scene.

  4. Set [name] Enter : type in the name.

[Tip]Tip

To name a scene immediately after recording it, pressing the Set key will open a Quickname window. Enter the scene name and select OK.