Ribbon Cable Protection

Ribbon Cable Protection (Units manufactured before 09/13/08)


Problem:
Sharp edges around the ribbon cable slots on the LED head can penetrate the LED ribbon cables shorting them out and causing the driver board to fail.

Solution:
Slots on the Driver Mount Bulkhead that the LED driver board ribbon cables pass through should be inspected on any unit manufactured before September 13, 2008.  If burrs are observed on any slot, all the ribbon cables on the unit should be protected by applying Lexan pads to both sides of each of the 18 ribbon cables.


Click here for Quicktime version
Click here for WindowsMedia version